|
|
1. Disclaimer:
I'd recommend to open the camera only if you are ready to the worst case
scenario, many users damaged the camera permanently - I was ready to sell mine
for spares on ebay in case it went wrong - but I managed to fix it!
I'm not expert in DYO, everyone is able to fix it and save some monies!
2. Wear surgeon gloves
3. Sketch layout screws
4. Remove front cover
5. Remove back cover
6. Cut 2 mm of the drawing pin and insert it in the same position of the broken one. You need to press firmly to create a hole in the plastic. Make sure you insert the pin in the right place!
7. FINALLY THE CAM IS ON AND WORKING PERFECTLY!!!!
GOOD LUCK! Tom
rusmi@yahoo.com